|SY40K80F Symmetra PX APC UPS & PDU
Technical web site
APC SY40K80F Symmetra PX UPS- Technical Specifications
Symmetra PX 40kW Scalable to 80kW N+1 with SYCFXR8-* Premium Battery Enclosure, 208V
A high-efficiency modular 3-phase UPS. Suitable for small to medium data center application. 40kVA output, scalable to 80kVA N+1. 120V, 208V
Output | Input | Batteries & Runtime | Communications & Management | Conformance
Dimensions and Weight| Features & Benefits
Output Power Capacity: 40 kW / 40 kVA
Max Configurable Power: 80 kW / 80 kVA
Nominal Output Voltage: 120V,208V,208V 3PH
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 57 - 63 Hz for 60 Hz nominal
Crest Factor: Unlimited
Topology: Double Conversion Online
Waveform Type: Sine wave
(1) Hard Wire 5-wire (3PH + N + G)
(1) Screw Terminals
Bypass: Built-in Static Bypass
Customer Replaceable Parts available :
SYPM10KF APC Symmetra PX 10kVA Power Module: 10 kW / 10 kVA, Input 208V, 208V 3PH / Output 208V, 208V 3PH , Rack Height 3 U
SYMIM4 APCSymmetra PX Intelligence Module
Nominal Input Voltage: 208V 3PH
Input Frequency: 50/60 Hz +/- 5 Hz (auto sensing)
Input Connections: Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations: 177 - 240V
|Batteries & Runtime
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules: 4
Available Battery Slots: 4
Typical recharge time: 2 hour(s)
Replacement Battery: SYBT4 Battery Volt-Amp-Hour Capacity 672
Extended Run Options: Symmetra PX 40kW Scalable to 80kW N+1, 208V
Customer Replaceable Parts available :
SYBTU1-PLP APC Symmetra PX Battery Module: Battery Volt-Amp-Hour Capacity 672, Net Weight 50-60 lbs, Shipping Weight 56.1 lbs
SYBT4 APC Symmetra PX Battery String (4 battery blocks per string): Battery Volt-Amp-Hour Capacity 2765, Net Weight 200 lbs, Shipping Weight 224 lbs
SYCFXR8-8 APC Symmetra PX Extended Run Premium Battery Cabinet:Includes 8 Battery strings at 2765 Volt-Amp-Hour Capacity each in a frame, Size: 82"X22"X34" Height, Width, Depth
SYCFXR8-8 APC Symmetra PX Extended Run Premium Battery Cabinet: Includes 8 Battery strings at 2765 Volt-Amp-Hour Capacity each in a frame, Size: 82"X22"X34" Height, Width, Depth
|Communications & Management
Interface Port(s): SmartSlot
Available SmartSlot™ Interface Quantity: 2
Pre-Installed SmartSlot™ Cards: AP9630
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO): Yes
Regulatory Approvals: cUL Listed,EN 50091-1,EN 50091-2,FCC Part 15 Class A,ISO 14001,ISO 9001,UL 1778,UL 60950
Standard Warranty: 1 year on-site repair or replace with factory authorized Start-Up
|Dimensions and Weights
Maximum Height: 2070.00 mm / 81.5 ins
Maximum Width: 1219.00 mm / 48 ins
Maximum Depth: 902.00 mm / 35.51 ins
Rack Height: 42U
Net Weight: 1012.73 KG / 2228 lbs
Shipping Weight: 854.10 KG / 2353.8 lbs
Shipping Height: 2311.00 mm / 91 ins
Shipping Width: 749.00 mm / 59 ins
Shipping Depth: 1054.00 mm / 41.5 ins
Units per Pallet: 1.00
Operating Environment: 0 - 40 °C
Operating Relative Humidity: 0 - 95%
Operating Elevation: 0-3000 meters
Storage Temperature: -15 - 40 °C
Storage Relative Humidity: 0 - 95%
Storage Elevation: 0-4500 meters
Audible noise at 1 meter from surface of unit: 64.00 dBA
Online Thermal Dissipation: 11884.00 BTU/hr
Protection Class: NEMA 1
|Features & Benefits
Configurable for N+1 internal redundancy: Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Redundant Intelligence Modules: Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
Power Modules connected in parallel: Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Battery modules connected in parallel: Delivers higher availability through redundant batteries.
Hot-swappable power modules: Ensures clean, uninterrupted power to protected equipment during Power Module replacement.
Hot-swappable intelligence modules: Ensures clean, uninterrupted power to protected equipment during Intelligence Module replacement.
Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Modular design: Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Network manageable: Provides remote management of the UPS over the network.
Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
Scalable power capacity: Reduces UPS over-sizing costs today by allowing quick upgrades later.
Scalable runtime: Allows additional run time to be quickly added as needed.
Front-access servicing: Simplifies installation and maintenance while minimizing space requirements.
Programmable frequency: Ensures compatibility with different input frequencies.
SmartSlot: Customize UPS capabilities with management cards.
Battery replacement without tools: Allows quick, easy battery replacement.
Total Cost of Ownership
Fully-rated power kVA equals kW: Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator Compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
Manageable external batteries: Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Intelligent Battery Management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
5x8 Start-up service included: Required for full coverage of factory warranty
InfraStruXure Central compatible: Enables centralized management via StruxureWare Central.
LED status indicators: Quickly understand unit and power status with visual indicators.
Audible Alarms: Provides notification of changing utility power and UPS conditions
Where to Buy : APC-SY40K80F, APC-SYCFXR8-8, APC-SY10K40F, APC-SY20K40F, APC-SY30K40F,
APC-SY40K40F, APC-SY50K80F, , APC-SY60K80F, APC-SY70K80F, APC-SY80K80F
IBM Parts : HP Parts : Sun Parts : Dell Parts : SAN - Fiber Channel HBA's
|Legal Disclaimer: this site is in no way endorsed or affiliated with APC, Oracle or Sun Microsystems, Inc. This site is independently run and in no way represents APC, Oracle or Sun Microsystems, Inc. Oracle or Sun Does not officially sponsor, approve, or endorse this site or its content. THIS DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. Content on this web site is provided for informational purposes only. We accept no responsibility for any loss, injury or inconvenience sustained by any person resulting from information published on this site.